31 products · 14 groups · 3 families

Products

Reinforcements, resins and vacuum consumables for composite manufacturing. Pick your method and cure temperature; products that don’t fit drop out on their own.

/

31 products

View


Carbon Fiber Fabric 200 g/m², 3K TwillCF-200T	Not limited by temperature	Not suitable for Oven cureSuitable for Vacuum infusionNot suitable for Autoclave	200g/m²5.9oz/yd²
Glass Fiber Fabric 300 g/m², Plain WeaveGF-300D	Not limited by temperature	Not suitable for Oven cureSuitable for Vacuum infusionNot suitable for Autoclave	300g/m²8.85oz/yd²
PVC Foam Core 80 kg/m³CR-P80	≤ 80 °C≤ 176 °F	Not suitable for Oven cureSuitable for Vacuum infusionNot suitable for Autoclave		5–40mm0.197–1.57in
Infusion Epoxy System, Low ViscosityEP-I20	20–80 °C68–176 °F	Not suitable for Oven cureSuitable for Vacuum infusionNot suitable for Autoclave
Heat-Cure Epoxy SystemEP-H140	80–140 °C176–284 °F	Suitable for Oven cureNot suitable for Vacuum infusionNot suitable for Autoclave
Infusion Vinyl Ester ResinVE-I40	15–80 °C59–176 °F	Not suitable for Oven cureSuitable for Vacuum infusionNot suitable for Autoclave
Isophthalic Gelcoat, Mold SurfaceGC-ISO	15–80 °C59–176 °F	Not suitable for Oven cureSuitable for Vacuum infusionNot suitable for Autoclave
Adhesive Film, 120 °C CureYF-120	110–130 °C · 7 bar230–266 °F · 102 psi	Suitable for Oven cureNot suitable for Vacuum infusionSuitable for Autoclave	300g/m²8.85oz/yd²
Co-extruded Vacuum Bagging FilmVT-P120Green	≤ 120 °C≤ 248 °F	Not suitable for Oven cureSuitable for Vacuum infusionNot suitable for Autoclave		75–80µm2.95–3.15mil	500%
Self-Releasing Vacuum Bagging FilmVT-K150BGreen	≤ 150 °C≤ 302 °F	Suitable for Oven cureSuitable for Vacuum infusionSuitable for Autoclave		50µm1.97mil	500%
Co-extruded Vacuum Bagging Film, Epoxy and PhenolicVT-K170Violet	≤ 170 °C≤ 338 °F	Suitable for Oven cureSuitable for Vacuum infusionSuitable for Autoclave		50µm1.97mil	400%
Modified Nylon Vacuum Bagging FilmVT-N204BClear green	≤ 204 °C · 6.9 bar≤ 399 °F · 100 psi	Suitable for Oven cureSuitable for Vacuum infusionSuitable for Autoclave		50µm1.97mil	415%
Nylon Vacuum Bagging FilmVT-N200Pink	≤ 212 °C≤ 414 °F	Suitable for Oven cureSuitable for Vacuum infusionSuitable for Autoclave		50µm1.97mil	550%
Silicone Vacuum MembraneVT-S230	≤ 230 °C · 7 bar≤ 446 °F · 102 psi	Suitable for Oven cureSuitable for Vacuum infusionSuitable for Autoclave		1.5mm0.059in	600%
Modified Nylon Vacuum Bagging Film, 232 °CVT-N232Blue	≤ 232 °C · 6.9 bar≤ 450 °F · 100 psi	Suitable for Oven cureSuitable for Vacuum infusionSuitable for Autoclave		50µm1.97mil	350%
Perforated Polyethylene Release FilmRF-P120Orange-red	≤ 120 °C≤ 248 °F	Suitable for Oven cureSuitable for Vacuum infusionNot suitable for Autoclave		25µm0.98mil	560%
PMP Release FilmRF-M204Pink	≤ 204 °C≤ 399 °F	Suitable for Oven cureSuitable for Vacuum infusionSuitable for Autoclave		30µm1.18mil	285%
ETFE Release FilmRF-E260Blue	≤ 260 °C≤ 500 °F	Suitable for Oven cureSuitable for Vacuum infusionSuitable for Autoclave		25µm0.98mil	350%
Heavyweight Polyester Peel Ply 155 g/m²PP-P180BWhite	≤ 180 °C≤ 356 °F	Suitable for Oven cureSuitable for Vacuum infusionSuitable for Autoclave	155g/m²4.57oz/yd²
Nylon Peel Ply 80 g/m²PP-N200White	≤ 204 °C≤ 399 °F	Suitable for Oven cureSuitable for Vacuum infusionSuitable for Autoclave	80g/m²2.36oz/yd²
Nylon Peel Ply, Red TracerPP-N204White, red tracer	≤ 204 °C≤ 399 °F	Suitable for Oven cureSuitable for Vacuum infusionSuitable for Autoclave	85g/m²2.51oz/yd²
Nylon Peel Ply 150 g/m²PP-N204FNatural	≤ 204 °C≤ 399 °F	Suitable for Oven cureSuitable for Vacuum infusionSuitable for Autoclave	150g/m²4.42oz/yd²
Polyester Peel Ply 85 g/m²PP-P180White, black tracer	≤ 204 °C≤ 399 °F	Suitable for Oven cureSuitable for Vacuum infusionSuitable for Autoclave	85g/m²2.51oz/yd²
Polyester Peel Ply 85 g/m², NaturalPP-P204Natural	≤ 204 °C≤ 399 °F	Suitable for Oven cureSuitable for Vacuum infusionSuitable for Autoclave	85g/m²2.51oz/yd²
Polyester Breather 80 g/m²BB-80White	≤ 204 °C≤ 399 °F	Suitable for Oven cureNot suitable for Vacuum infusionSuitable for Autoclave	80g/m²2.36oz/yd²
Polyester Breather 150 g/m²BB-150White	≤ 204 °C · 4 bar≤ 399 °F · 58 psi	Suitable for Oven cureNot suitable for Vacuum infusionSuitable for Autoclave	150g/m²4.42oz/yd²	2mm0.079in
Polyester Breather 340 g/m²BB-340White	≤ 204 °C · 6.9 bar≤ 399 °F · 100 psi	Suitable for Oven cureNot suitable for Vacuum infusionSuitable for Autoclave	340g/m²10oz/yd²	4mm0.157in
Polyethylene Flow MeshFM-120Green	≤ 120 °C≤ 248 °F	Not suitable for Oven cureSuitable for Vacuum infusionNot suitable for Autoclave	140g/m²4.13oz/yd²
Sealant Tape, General PurposeSB-150Black	≤ 150 °C≤ 302 °F	Suitable for Oven cureSuitable for Vacuum infusionSuitable for Autoclave
Sealant Tape, High TemperatureSB-230Dark gray	≤ 232 °C · 7 bar≤ 450 °F · 102 psi	Suitable for Oven cureSuitable for Vacuum infusionSuitable for Autoclave
Spiral Tubing 12 mmVB-SH12	≤ 120 °C≤ 248 °F	Not suitable for Oven cureSuitable for Vacuum infusionNot suitable for Autoclave

↑↓row↵quick lookXcompareAadd to request

Carbon Fiber Fabric 200 g/m², 3K Twill
Carbon Fiber FabricCF-200T
A twill weave that drapes well into the mold, for visible surfaces and structural laminates.
Areal weight
200 g/m²5.9 oz/yd²The resin sets the temperature limit
- Infusion
On request list
Glass Fiber Fabric 300 g/m², Plain Weave
Glass FiberGF-300D
Cost-effective E-glass fabric with balanced strength.
Areal weight
300 g/m²8.85 oz/yd²The resin sets the temperature limit
- Infusion
On request list
PVC Foam Core 80 kg/m³
Foam CoreCR-P80
Lightweight closed-cell core that adds stiffness to sandwich structures.
Density
80 kg/m³4.99 lb/ft³≤ 80 °C≤ 176 °F
- Infusion
On request list
Infusion Epoxy System, Low Viscosity
Epoxy ResinEP-I20
Low-viscosity system with a long open time for even filling of large parts.
Cure range
20–80 °C68–176 °F
- Infusion
On request list
Heat-Cure Epoxy System
Epoxy ResinEP-H140
Heat-curing epoxy system for short-cycle molding.
Cure range
80–140 °C176–284 °F
- Oven
On request list
Infusion Vinyl Ester Resin
Vinyl Ester ResinVE-I40
Low-viscosity vinyl ester for corrosion-resistant structures.
Cure range
15–80 °C59–176 °F
- Infusion
On request list
Isophthalic Gelcoat, Mold Surface
Gelcoat & TopcoatGC-ISO
Surface layer applied to the mold first, resistant to water and UV.
Cure range
15–80 °C59–176 °F
- Infusion
On request list
Adhesive Film, 120 °C Cure
Adhesive FilmYF-120
Epoxy film that bonds composite and metal parts at an even thickness.
Cure range
110–130 °C230–266 °F7 bar102 psi
- Oven
- Autoclave
On request list
Co-extruded Vacuum Bagging Film
Vacuum Bag FilmVT-P120Green
High-elongation film for low-temperature infusion.
Upper limit
≤ 120 °C≤ 248 °F
- Infusion
On request list
Self-Releasing Vacuum Bagging Film
Vacuum Bag FilmVT-K150BGreen
Releases on both faces, combining bag and release film in one layer.
Upper limit
≤ 150 °C≤ 302 °F
- Oven
- Infusion
- Autoclave
On request list
Co-extruded Vacuum Bagging Film, Epoxy and Phenolic
Vacuum Bag FilmVT-K170Violet
Tough yet flexible film for medium-temperature epoxy and phenolic prepregs.
Upper limit
≤ 170 °C≤ 338 °F
- Oven
- Infusion
- Autoclave
On request list
Modified Nylon Vacuum Bagging Film
Vacuum Bag FilmVT-N204BClear green
Clear green modified nylon film widely used in aerospace cures.
Upper limit
≤ 204 °C≤ 399 °F6.9 bar100 psi
- Oven
- Infusion
- Autoclave
On request list
Nylon Vacuum Bagging Film
Vacuum Bag FilmVT-N200Pink
Heat-resistant bagging film for autoclave and oven cures.
Upper limit
≤ 212 °C≤ 414 °F
- Oven
- Infusion
- Autoclave
On request list
Silicone Vacuum Membrane
Vacuum Bag FilmVT-S230
Reusable silicone bag shaped to the mold, for series production.
Upper limit
≤ 230 °C≤ 446 °F7 bar102 psi
- Oven
- Infusion
- Autoclave
On request list
Modified Nylon Vacuum Bagging Film, 232 °C
Vacuum Bag FilmVT-N232Blue
Nylon film for high-temperature cures, resistant to heat ageing.
Upper limit
≤ 232 °C≤ 450 °F6.9 bar100 psi
- Oven
- Infusion
- Autoclave
On request list
Perforated Polyethylene Release Film
Release FilmRF-P120Orange-red
Perforated film that lets excess resin pass in a controlled way.
Upper limit
≤ 120 °C≤ 248 °F
- Oven
- Infusion
On request list
PMP Release Film
Release FilmRF-M204Pink
Light, heat-resistant pink film for a wide range of parting uses.
Upper limit
≤ 204 °C≤ 399 °F
- Oven
- Infusion
- Autoclave
On request list
ETFE Release Film
Release FilmRF-E260Blue
Fluoropolymer release film that does not stick to the part at high temperature.
Upper limit
≤ 260 °C≤ 500 °F
- Oven
- Infusion
- Autoclave
On request list
Heavyweight Polyester Peel Ply 155 g/m²
Peel PlyPP-P180BWhite
Heavy polyester peel ply used with resins including phenolic.
Upper limit
≤ 180 °C≤ 356 °F155 g/m²4.57 oz/yd²
- Oven
- Infusion
- Autoclave
On request list
Nylon Peel Ply 80 g/m²
Peel PlyPP-N200White
Nylon peel ply for high-temperature cures.
Upper limit
≤ 204 °C≤ 399 °F80 g/m²2.36 oz/yd²
- Oven
- Infusion
- Autoclave
On request list
Nylon Peel Ply, Red Tracer
Peel PlyPP-N204White, red tracer
Nylon 66 peel ply with a red tracer line that is easy to spot on the laminate.
Upper limit
≤ 204 °C≤ 399 °F85 g/m²2.51 oz/yd²
- Oven
- Infusion
- Autoclave
On request list
Nylon Peel Ply 150 g/m²
Peel PlyPP-N204FNatural
Nylon 66 peel ply that leaves a fine surface texture.
Upper limit
≤ 204 °C≤ 399 °F150 g/m²4.42 oz/yd²
- Oven
- Infusion
- Autoclave
On request list
Polyester Peel Ply 85 g/m²
Peel PlyPP-P180White, black tracer
Peel ply that leaves a clean, textured surface for secondary bonding.
Upper limit
≤ 204 °C≤ 399 °F85 g/m²2.51 oz/yd²
- Oven
- Infusion
- Autoclave
On request list
Polyester Peel Ply 85 g/m², Natural
Peel PlyPP-P204Natural
Natural-color polyester peel ply used with resins including phenolic.
Upper limit
≤ 204 °C≤ 399 °F85 g/m²2.51 oz/yd²
- Oven
- Infusion
- Autoclave
On request list
Polyester Breather 80 g/m²
Breather, BleederBB-80White
Lightweight needle-punched polyester felt.
Areal weight
80 g/m²2.36 oz/yd²≤ 204 °C≤ 399 °F
- Oven
- Autoclave
On request list
Polyester Breather 150 g/m²
Breather, BleederBB-150White
Felt that carries air and volatiles under the bag to the vacuum port.
Areal weight
150 g/m²4.42 oz/yd²≤ 204 °C · 4 bar≤ 399 °F · 58 psi
- Oven
- Autoclave
On request list
Polyester Breather 340 g/m²
Breather, BleederBB-340White
Heavy felt that stays porous even under high autoclave pressure.
Areal weight
340 g/m²10 oz/yd²≤ 204 °C · 6.9 bar≤ 399 °F · 100 psi
- Oven
- Autoclave
On request list
Polyethylene Flow Mesh
Flow MeshFM-120Green
Knitted mesh that quickly spreads resin across the laminate surface in vacuum infusion.
Upper limit
≤ 120 °C≤ 248 °F140 g/m²4.13 oz/yd²
- Infusion
On request list
Sealant Tape, General Purpose
Sealant TapeSB-150Black
Flexible tape that seals the bag to the mold airtight.
Upper limit
≤ 150 °C≤ 302 °F
- Oven
- Infusion
- Autoclave
On request list
Sealant Tape, High Temperature
Sealant TapeSB-230Dark gray
Tape that keeps its seal in autoclave cures without softening or flowing.
Upper limit
≤ 232 °C≤ 450 °F7 bar102 psi
- Oven
- Infusion
- Autoclave
On request list
Spiral Tubing 12 mm
Vacuum EquipmentVB-SH12
Tubing that distributes resin along the part and carries vacuum in infusion.
Upper limit
≤ 120 °C≤ 248 °F
- Infusion
On request list