Representative image · Sencronom
Vacuum and process consumables · Peel Ply
Nylon Peel Ply 80 g/m²
Nylon peel ply for high-temperature cures. Prepares the bonding surface on epoxy and phenolic systems.
PP-N200
- Operating range
- ≤ 204 °C≤ 399 °F
- Areal weight
- 80g/m²2.36oz/yd²
- Width
- 1520mm59.8in
Technical properties
| Parameter | Value |
|---|---|
| Physical / dimensional | |
| Areal weight | 80g/m²2.36oz/yd² |
| Color | White |
| Chemical / surface | |
| Resin system compatibility | Epoxy, Phenolic |
| Process / commercial | |
| Roll width | 1520mm59.8in |
| Process compatibility | Oven cure, Vacuum infusion, Autoclave |
Where it sits in the vacuum bag
The vacuum bag from mould to bag, with the layers each method uses. Hover over a layer or pick one from the list.
Method
3Peel plyThis productPeeled off after cure, leaving a clean, bond-ready surface.
Layers, top to bottom
Numbers show the layup order.
Representative layup; layers vary with the method and the part.
Operating range
≤ 204 °C≤ 399 °F
032100212200392300 °C572 °F
- Maximum service temperature
- 204°C399°F
Method suitability
- Oven cureSuitableSuitable for Oven cure
The best texture for a bonding surface.
- Vacuum infusionSuitableSuitable for Vacuum infusion
Works; polyester peel ply is more economical.
- AutoclaveSuitableSuitable for Autoclave
A clean, textured surface even at high temperature.
Supply and storage
- Resin compatibility
- Epoxy
- Phenolic
- Packaging
- Roll, 100 mRoll, 328 ft
- Storage
- Dry area
Alternatives in this group
Peel Ply · Differences are relative to this product.
| Compare | Product | T max °C°F | Areal weight | Width | Oven | Infusion | Autoclave | Product page |
|---|---|---|---|---|---|---|---|---|
| Heavyweight Polyester Peel Ply 155 g/m²PP-P180B | 180°C356°F−24−43 | 155g/m²4.57oz/yd²+75+2.21 | – | Suitable for Oven cure | Suitable for Vacuum infusion | Suitable for Autoclave | ||
| Nylon Peel Ply 80 g/m²this productPP-N200 | 204°C399°F | 80g/m²2.36oz/yd² | 1520mm59.8in | Suitable for Oven cure | Suitable for Vacuum infusion | Suitable for Autoclave | ||
| Nylon Peel Ply, Red TracerPP-N204 | 204°C399°F | 85g/m²2.51oz/yd²+5+0.15 | – | Suitable for Oven cure | Suitable for Vacuum infusion | Suitable for Autoclave | ||
| Nylon Peel Ply 150 g/m²PP-N204F | 204°C399°F | 150g/m²4.42oz/yd²+70+2.06 | – | Suitable for Oven cure | Suitable for Vacuum infusion | Suitable for Autoclave | ||
| Polyester Peel Ply 85 g/m²PP-P180 | 204°C399°F | 85g/m²2.51oz/yd²+5+0.15 | 1000mm39.4in−520−20.5 | Suitable for Oven cure | Suitable for Vacuum infusion | Suitable for Autoclave | ||
| Polyester Peel Ply 85 g/m², NaturalPP-P204 | 204°C399°F | 85g/m²2.51oz/yd²+5+0.15 | – | Suitable for Oven cure | Suitable for Vacuum infusion | Suitable for Autoclave |