Representative image · Sencronom
Resins & adhesives · Vinyl Ester Resin
Infusion Vinyl Ester Resin
Low-viscosity vinyl ester for corrosion-resistant structures. Used by infusion in marine structures and chemical tanks.
VE-I40
- Operating range
- 15–80 °C59–176 °F
- Viscosity (25 °C)Viscosity (77 °F)
- 200mPa·s
- Gel time (25 °C)Gel time (77 °F)
- 40min
Technical properties
| Parameter | Value | Condition |
|---|---|---|
| Flow / permeability / absorption | ||
| Viscosity | 200mPa·s | 25 °C77 °F |
| Chemical / surface | ||
| Resin system compatibility | Vinyl ester | |
| Styrene content | 38% | |
| Process / commercial | ||
| Process compatibility | Vacuum infusion | |
| Gel time | 40min | 25 °C77 °F |
Where it sits in the vacuum bag
The vacuum bag from mould to bag, with the layers each method uses. Hover over a layer or pick one from the list.
MethodVacuum infusion
2LaminateThis productReinforcement fabric and resin: the part itself.
Layers, top to bottom
Numbers show the layup order.
Representative layup; layers vary with the method and the part.
Operating range
15–80 °C59–176 °F
03250122100212150302200392250 °C482 °F
- Maximum service temperature
- 80°C176°F
- Minimum service temperature
- 15°C59°F
Method suitability
- Oven cureNot used with this method
- Vacuum infusionSuitableSuitable for Vacuum infusion
Low viscosity; needs ventilation because of styrene.
- AutoclaveNot used with this method
Supply and storage
- Resin compatibility
- Vinyl ester
- Packaging
- 220 kg drum
- Storage
- Below 25 °C, away from lightBelow 77 °F, away from light