Representative image · Sencronom
Vacuum and process consumables · Flow Mesh
Polyethylene Flow Mesh
Knitted mesh that quickly spreads resin across the laminate surface in vacuum infusion. Laid over the peel ply and peeled off with it after cure.
FM-120
- Operating range
- ≤ 120 °C≤ 248 °F
- Areal weight
- 140g/m²4.13oz/yd²
- Width
- 1000mm39.4in
Technical properties
| Parameter | Value |
|---|---|
| Physical / dimensional | |
| Areal weight | 140g/m²4.13oz/yd² |
| Color | Green |
| Chemical / surface | |
| Resin system compatibility | Polyester, Vinyl ester, Epoxy |
| Process / commercial | |
| Roll width | 1000mm39.4in |
| Process compatibility | Vacuum infusion |
Where it sits in the vacuum bag
The vacuum bag from mould to bag, with the layers each method uses. Hover over a layer or pick one from the list.
MethodVacuum infusion
4Flow meshThis productSpreads resin quickly across the surface during infusion.
Layers, top to bottom
Numbers show the layup order.
Representative layup; layers vary with the method and the part.
Operating range
≤ 120 °C≤ 248 °F
03250122100212150302200392250 °C482 °F
- Maximum service temperature
- 120°C248°F
Method suitability
- Oven cureNot used with this method
- Vacuum infusionSuitableSuitable for Vacuum infusion
Spreads resin quickly across the laminate surface; peels off with the peel ply.
- AutoclaveNot used with this method
Supply and storage
- Resin compatibility
- Polyester
- Vinyl ester
- Epoxy
- Packaging
- Roll, 100 mRoll, 328 ft
- Storage
- Dry area