Representative image · Sencronom
Resins & adhesives · Adhesive Film
Adhesive Film, 120 °C Cure
Epoxy film that bonds composite and metal parts at an even thickness. Cures in the autoclave and the oven between 110 °C and 130 °C.
YF-120
- Operating range
- 110–130 °C · 7 bar230–266 °F · 102 psi
- Areal weight
- 300g/m²8.85oz/yd²
- Shelf life (−18 °C)Shelf life (0 °F)
- 12months
Technical properties
| Parameter | Value | Condition |
|---|---|---|
| Physical / dimensional | ||
| Areal weight | 300g/m²8.85oz/yd² | |
| Carrier / support | Polyester knit | |
| Chemical / surface | ||
| Resin system compatibility | Epoxy | |
| Process / commercial | ||
| Shelf life | 12months | -18 °C0 °F |
| Process compatibility | Oven cure, Autoclave | |
| Cure cycle | 60 min, 120 °C60 min, 248 °F | |
Operating range
110–130 °C · 7 bar230–266 °F · 102 psi
03250122100212150302200392250 °C482 °F
- Maximum service temperature
- 130°C266°F
- Minimum service temperature
- 110°C230°F
- Pressure resistance
- 7bar102psi
Method suitability
- Oven cureSuitableSuitable for Oven cure
Gives an even bond line; good results in an oven cure without pressure.
- Vacuum infusionNot used with this method
- AutoclaveSuitableSuitable for Autoclave
Void-free bond line under pressure.
Supply and storage
- Resin compatibility
- Epoxy
- Packaging
- Roll, with release paper
- Storage
- In a −18 °C freezer; 30-day out time at room temperatureIn a 0 °F freezer; 30-day out time at room temperature