Representative image · Sencronom
Vacuum and process consumables · Vacuum Bag Film
Co-extruded Vacuum Bagging Film
High-elongation film for low-temperature infusion. Used with resins that cure at room temperature or low temperature.
VT-P120
- Operating range
- ≤ 120 °C≤ 248 °F
- Thickness
- 75–80µm2.95–3.15mil
- Elongation at break
- 500%
- Width (open)
- 3200mm126in
- Roll length
- 250m820ft
Technical properties
| Parameter | Value | Condition | Test method |
|---|---|---|---|
| Mechanical | |||
| Elongation at break — MD | 500% | direction not stated | ASTM D882 |
| Physical / dimensional | |||
| Thickness | 75–80µm2.95–3.15mil | ||
| Color | Green | ||
| Chemical / surface | |||
| Resin system compatibility | Polyester, Vinyl ester, Epoxy | ||
| Process / commercial | |||
| Film format | Tube | ||
| Roll width | 3200mm126in | open width | |
| Roll length | 250m820ft | ||
| Process compatibility | Vacuum infusion | ||
Where it sits in the vacuum bag
The vacuum bag from mould to bag, with the layers each method uses. Hover over a layer or pick one from the list.
MethodVacuum infusion
7Vacuum bagThis productSeals the stack; under vacuum it presses atmospheric pressure onto the part.
Layers, top to bottom
Numbers show the layup order.
Representative layup; layers vary with the method and the part.
Operating range
≤ 120 °C≤ 248 °F
03250122100212150302200392250 °C482 °F
- Maximum service temperature
- 120°C248°F
Method suitability
- Oven cureNot used with this method
- Vacuum infusionSuitableSuitable for Vacuum infusion
High elongation conforms easily to the mold; sufficient for a room-temperature cure.
- AutoclaveNot used with this method
Supply and storage
- Resin compatibility
- Polyester
- Vinyl ester
- Epoxy
- Packaging
- Roll, 250 mRoll, 820 ft
- Storage
- Cool, dry area
Alternatives in this group
Vacuum Bag Film · Differences are relative to this product.
| Compare | Product | T max °C°F | P max barpsi | Elongation at break | Thickness | Tensile strength at break | Oven | Infusion | Autoclave | Product page |
|---|---|---|---|---|---|---|---|---|---|---|
| Co-extruded Vacuum Bagging Filmthis productVT-P120 | 120°C248°F | – | 500% | 75–80µm2.95–3.15mil | – | Not used with this method | Suitable for Vacuum infusion | Not used with this method | ||
| Self-Releasing Vacuum Bagging FilmVT-K150B | 150°C302°F+30+54 | – | 500% | 50µm1.97mil | 50MPa | Suitable for Oven cure | Suitable for Vacuum infusion | Suitable for Autoclave | ||
| Co-extruded Vacuum Bagging Film, Epoxy and PhenolicVT-K170 | 170°C338°F+50+90 | – | 400%−100−100 | 50µm1.97mil | 45MPa | Suitable for Oven cure | Suitable for Vacuum infusion | Suitable for Autoclave | ||
| Modified Nylon Vacuum Bagging FilmVT-N204B | 204°C399°F+84+151 | 6.9bar100psi | 415%−85−85 | 50µm1.97mil | 96MPa | Suitable for Oven cure | Suitable for Vacuum infusion | Suitable for Autoclave | ||
| Nylon Vacuum Bagging FilmVT-N200 | 212°C414°F+92+166 | – | 550%+50+50 | 50µm1.97mil | 95MPa | Suitable for Oven cure | Suitable for Vacuum infusion | Suitable for Autoclave | ||
| Silicone Vacuum MembraneVT-S230 | 230°C446°F+110+198 | 7bar102psi | 600%+100+100 | 1.5mm0.059in | – | Suitable for Oven cure | Suitable for Vacuum infusion | Suitable for Autoclave | ||
| Modified Nylon Vacuum Bagging Film, 232 °CVT-N232 | 232°C450°F+112+202 | 6.9bar100psi | 350%−150−150 | 50µm1.97mil | 85MPa | Suitable for Oven cure | Suitable for Vacuum infusion | Suitable for Autoclave |