Representative image · Sencronom
Fibers & cores · Carbon Fiber Fabric
Carbon Fiber Fabric 200 g/m², 3K Twill
A twill weave that drapes well into the mold, for visible surfaces and structural laminates. Used in infusion with dry fiber. The laminate's temperature limit is set by the resin system.
CF-200T
- Operating range
- The resin sets the temperature limit
- Areal weight
- 200g/m²5.9oz/yd²
- Fabric width
- 1000mm39.4in
- Roll length
- 50m164ft
Technical properties
| Parameter | Value | Test method |
|---|---|---|
| Physical / dimensional | ||
| Areal weight | 200g/m²5.9oz/yd² | ISO 3374 |
| Weave type | Twill 2/2 | |
| Tow size | 3K | |
| Chemical / surface | ||
| Resin system compatibility | Epoxy, Vinyl ester | |
| Process / commercial | ||
| Roll width | 1000mm39.4in | |
| Roll length | 50m164ft | |
| Process compatibility | Vacuum infusion | |
The fiber is not limited by cure temperature.
Where it sits in the vacuum bag
The vacuum bag from mould to bag, with the layers each method uses. Hover over a layer or pick one from the list.
MethodVacuum infusion
2LaminateThis productReinforcement fabric and resin: the part itself.
Layers, top to bottom
Numbers show the layup order.
Representative layup; layers vary with the method and the part.
Operating range
Not limited by temperature
03250122100212150302200392250 °C482 °F
The resin sets the temperature limit
Method suitability
- Oven cureNot used with this method
- Vacuum infusionSuitableSuitable for Vacuum infusion
The twill weave drapes into mold curves and wets out evenly.
- AutoclaveNot used with this method
Supply and storage
- Resin compatibility
- Epoxy
- Vinyl ester
- Packaging
- Roll in a carton box, 50 mRoll in a carton box, 164 ft
- Storage
- Dry, dust-free area, in original packaging