Representative image · Sencronom
Resins & adhesives · Gelcoat & Topcoat
Isophthalic Gelcoat, Mold Surface
Surface layer applied to the mold first, resistant to water and UV. The first layer of the surface in infusion molds.
GC-ISO
- Operating range
- 15–80 °C59–176 °F
- Application thickness
- 0.5–0.7mm0.02–0.028in
- Gel time (25 °C)Gel time (77 °F)
- 12min
Technical properties
| Parameter | Value | Condition |
|---|---|---|
| Physical / dimensional | ||
| Application thickness | 0.5–0.7mm0.02–0.028in | |
| Chemical / surface | ||
| Resin system compatibility | Polyester, Vinyl ester | |
| Process / commercial | ||
| Process compatibility | Vacuum infusion | |
| Gel time | 12min | 25 °C77 °F |
Operating range
15–80 °C59–176 °F
03250122100212150302200392250 °C482 °F
- Maximum service temperature
- 80°C176°F
- Minimum service temperature
- 15°C59°F
Method suitability
- Oven cureNot used with this method
- Vacuum infusionSuitableSuitable for Vacuum infusion
Thickness control needs care; it sets the surface quality.
- AutoclaveNot used with this method
Supply and storage
- Resin compatibility
- Polyester
- Vinyl ester
- Packaging
- 25 kg can
- Storage
- Below 25 °C, away from lightBelow 77 °F, away from light