Representative image · Sencronom
Vacuum and process consumables · Peel Ply
Nylon Peel Ply 150 g/m²
Nylon 66 peel ply that leaves a fine surface texture.
PP-N204F
- Operating range
- ≤ 204 °C≤ 399 °F
- Areal weight
- 150g/m²4.42oz/yd²
Technical properties
| Parameter | Value |
|---|---|
| Physical / dimensional | |
| Areal weight | 150g/m²4.42oz/yd² |
| Color | Natural |
| Chemical / surface | |
| Resin system compatibility | Epoxy, Polyester, Vinyl ester |
| Process / commercial | |
| Process compatibility | Oven cure, Vacuum infusion, Autoclave |
| Other | |
| Material | Nylon 66 |
Where it sits in the vacuum bag
The vacuum bag from mould to bag, with the layers each method uses. Hover over a layer or pick one from the list.
Method
3Peel plyThis productPeeled off after cure, leaving a clean, bond-ready surface.
Layers, top to bottom
Numbers show the layup order.
Representative layup; layers vary with the method and the part.
Operating range
≤ 204 °C≤ 399 °F
032100212200392300 °C572 °F
- Maximum service temperature
- 204°C399°F
Method suitability
- Oven cureSuitableSuitable for Oven cure
Nylon holds up in high-temperature cures.
- Vacuum infusionSuitableSuitable for Vacuum infusion
Nylon holds up in high-temperature cures.
- AutoclaveSuitableSuitable for Autoclave
Nylon holds up in high-temperature cures.
Supply and storage
- Resin compatibility
- Epoxy
- Polyester
- Vinyl ester
- Packaging
- Roll
- Storage
- In a dry area
Alternatives in this group
Peel Ply · Differences are relative to this product.
| Compare | Product | T max °C°F | Areal weight | Width | Oven | Infusion | Autoclave | Product page |
|---|---|---|---|---|---|---|---|---|
| Heavyweight Polyester Peel Ply 155 g/m²PP-P180B | 180°C356°F−24−43 | 155g/m²4.57oz/yd²+5+0.15 | – | Suitable for Oven cure | Suitable for Vacuum infusion | Suitable for Autoclave | ||
| Nylon Peel Ply 80 g/m²PP-N200 | 204°C399°F | 80g/m²2.36oz/yd²−70−2.06 | 1520mm59.8in | Suitable for Oven cure | Suitable for Vacuum infusion | Suitable for Autoclave | ||
| Nylon Peel Ply, Red TracerPP-N204 | 204°C399°F | 85g/m²2.51oz/yd²−65−1.92 | – | Suitable for Oven cure | Suitable for Vacuum infusion | Suitable for Autoclave | ||
| Nylon Peel Ply 150 g/m²this productPP-N204F | 204°C399°F | 150g/m²4.42oz/yd² | – | Suitable for Oven cure | Suitable for Vacuum infusion | Suitable for Autoclave | ||
| Polyester Peel Ply 85 g/m²PP-P180 | 204°C399°F | 85g/m²2.51oz/yd²−65−1.92 | 1000mm39.4in | Suitable for Oven cure | Suitable for Vacuum infusion | Suitable for Autoclave | ||
| Polyester Peel Ply 85 g/m², NaturalPP-P204 | 204°C399°F | 85g/m²2.51oz/yd²−65−1.92 | – | Suitable for Oven cure | Suitable for Vacuum infusion | Suitable for Autoclave |