Representative image · Sencronom
Vacuum and process consumables · Vacuum Equipment
Spiral Tubing 12 mm
Tubing that distributes resin along the part and carries vacuum in infusion. Used on feed and vacuum lines.
VB-SH12
- Operating range
- ≤ 120 °C≤ 248 °F
- Diameter
- 12mm0.472in
- Roll length
- 50m164ft
Technical properties
| Parameter | Value | Condition |
|---|---|---|
| Physical / dimensional | ||
| Nominal diameter | 12mm0.472in | inner or outer not stated |
| Chemical / surface | ||
| Resin system compatibility | Independent of the resin system | |
| Process / commercial | ||
| Roll length | 50m164ft | |
| Process compatibility | Vacuum infusion | |
Where it sits in the vacuum bag
The vacuum bag from mould to bag, with the layers each method uses. Hover over a layer or pick one from the list.
MethodVacuum infusion
5Vacuum and resin linesThis productSpiral tubing spreads resin along the part; the line on the opposite edge draws the vacuum.
Layers, top to bottom
Numbers show the layup order.
Representative layup; layers vary with the method and the part.
Operating range
≤ 120 °C≤ 248 °F
03250122100212150302200392250 °C482 °F
- Maximum service temperature
- 120°C248°F
Method suitability
- Oven cureNot used with this method
- Vacuum infusionSuitableSuitable for Vacuum infusion
Easy to cut and connect; on feed and vacuum lines.
- AutoclaveNot used with this method
Supply and storage
- Resin compatibility
- Independent of the resin system
- Packaging
- Roll, 50 mRoll, 164 ft
- Storage
- Dry area