Representative image · Sencronom
Fibers & cores · Glass Fiber
Glass Fiber Fabric 300 g/m², Plain Weave
Cost-effective E-glass fabric with balanced strength. Used with polyester, vinyl ester and epoxy in boats, panels and general-purpose laminates.
GF-300D
- Operating range
- The resin sets the temperature limit
- Areal weight
- 300g/m²8.85oz/yd²
- Fabric width
- 1270mm50in
- Roll length
- 100m328ft
Technical properties
| Parameter | Value | Test method |
|---|---|---|
| Physical / dimensional | ||
| Areal weight | 300g/m²8.85oz/yd² | ISO 3374 |
| Weave type | Plain | |
| Fiber type | E-glass | |
| Chemical / surface | ||
| Resin system compatibility | Polyester, Vinyl ester, Epoxy | |
| Process / commercial | ||
| Roll width | 1270mm50in | |
| Roll length | 100m328ft | |
| Process compatibility | Vacuum infusion | |
Where it sits in the vacuum bag
The vacuum bag from mould to bag, with the layers each method uses. Hover over a layer or pick one from the list.
MethodVacuum infusion
2LaminateThis productReinforcement fabric and resin: the part itself.
Layers, top to bottom
Numbers show the layup order.
Representative layup; layers vary with the method and the part.
Operating range
Not limited by temperature
03250122100212150302200392250 °C482 °F
The resin sets the temperature limit
Method suitability
- Oven cureNot used with this method
- Vacuum infusionSuitableSuitable for Vacuum infusion
Easy to cut and lay up; wets out quickly.
- AutoclaveNot used with this method
Supply and storage
- Resin compatibility
- Polyester
- Vinyl ester
- Epoxy
- Packaging
- Roll, stretch-wrapped
- Storage
- Dry area, 15–30 °CDry area, 59–86 °F